-->
Drop Down MenusCSS Drop Down MenuPure CSS Dropdown Menu

Friday, August 12, 2016

A strange and rare fish found in Minahasa

The discovery of the rare fish in Minahasa by Adj. First. Insp. Jefrry Nggala, an officer with the Wanea Police in Manado, North Sulawesi taken seriously by universities and research institutes.

A shark researcher from the Research Center for Oceanography, Indonesian Institute of Sciences (Lembaga Ilmu Pengetahuan Indonesia/LIPI), Fahmi said that the fish found in Kalasey beach, Minahasa regency, on Sunday, August 7, 2016, is worth examining.
An Indonesian police officer found the carcass of the rarely-seen fish in North Sulawesi on Sunday. (Picture from: http://adf.ly/1d3PAT)
As previously reported by Kompas, Nggala find the odd-shaped fish in the dead condition. Allegedly, the death occurred shortly before the fish found. "When I found the fish, its eyes were purple," said Nggala.

Recognizing the characteristic peculiarities of the fish, Nggala then take a picture, upload the photos to Facebook, and search for information about it on the internet. As the results of his googling showed that fish measuring about 60 cm is 'Oxynotus brunensis,' or Prickly Dogfish whose status is nearly extinct.
A fish that looks like a shark measuring 60-centimeters-long was found on Kalasey Beach in Minahasa regency, North Sulawesi by a police officer Jefrry Nggala. (Picture from: http://adf.ly/1d3OZL)
Fahmi, who contacted by Kompas, on Monday, August 8, 2016, confirmed that the fish are indeed the type of spiny sharks are now increasingly rare.

"This is a new finding. Kind of like it usually is in temperate zone (in Australia and New Zealand waters)," said Fahmi.

Fahmi had contacted his fellow researchers from Australia and New Zealand. "They wonder such kind in the waters of Indonesia," he said. The discovery of brown-bodied fish in the waters of Minahasa can be construed as a "new record" of the Oxynotus genus in Indonesia. However, it can also be more than a new record. "It could be a new species if it is different from the type that is already there," he explained.

Fahmi hoped, the fish specimens that have the characteristics of large and spiny backs were stored because it can be a valuable research material. Meanwhile, N Gustaf M Mamangkey, a marine researcher at the Sam Ratulangi University in Manado said that the university had secured the rare fish specimens.

"At this time, the specimen stored at the Faculty of Fisheries and Oceanography, Sam Ratulangi University, and is planned to be carried out an 'autopsy' by the university expert teams and relatives in the near future," he said.

"Why was found stranded in the waters of North Sulawesi, let us wait for the answer together," he added through Facebook on Monday. *** [EKA | FROM VARIOUS SOURCES | KOMPAS]
Note: This blog  can be accessed via your smart phone

This is a new flat-tracker of Indian Motorcycle

Indian Motorcycle officially launch the new model Scout FTR750 in the 76th annual Sturgis Motorcycle Rally event. This flat tracker type motorcycle will also mark the return of the Indian Motorcycle to the AMA Pro Springfield Mile racing event in Illinois.
Indian Scout FTR750. (Picture from: http://adf.ly/1d3SMm)
To mark the launch of the Scout FTR750, the company invite two flat tracker legends, ie Bobby Hill and Bill Tuman. Both are members of the AMA Hall of Fame who used to take part with the Indian Motorcycle.

"A heritage of racing and winning is in the lifeblood of this brand, and everyone in attendance was clearly proud to be a part of this important moment in the historic return of Indian Motorcycle to professional flat track racing," said President of Motorcycles Steve Menneto.
Rear side view of Indian Scout FTR750. (Picture from: http://adf.ly/1d3SMm)
Indian Motorcycle has not revealed detailed specifications of its Scout FTR750. But note this bike brings 750 cc v-twin engine, tubular steel frame, and fully carbon fiber body to cut the weight.

Indians Motorcycle also have not said whether the motorcycle will be sold to the public or only for racing purposes. Certainly, Indian Scout FTR750 going to be a strong competitor of Harley-Davidson XG750R are also new for release some time ago.

Kept spur your adrenaline on the power of two-wheeled monster and stay alive with the true safety riding. God will forgive Your sins.... *** [EKA | FROM VARIOUS SOURCES | CYCLENEWS]
Note: This blog  can be accessed via your smart phone

Thursday, August 11, 2016

Will the 'Keating Berus' supercar debut next year?

In the near future, Bolton-based supercar manufacturer Keating Supercars will present a road monster named 'Keating Berus.' Although there was less familiar, but it will come with outstanding performance. The vehicle' name comes from Vipera Berus - the scientific name for a common European viper.
Keating Supercars Berus will debut on Top Marques Monaco show in April next year. (Picture from: http://adf.ly/1d1YbV)
Claimed to have a light weight, super speed, as well as an elegant look similar to F1 cars. Reportedly, Keating Berus is a supercar that has power up to 2,000 hp and will be unveiled at the Top Marques Monaco show in April next year. Is it true?

As we all know that Keating Supercars introduce his first supercar named TKR at the London Motor Show 2006. This supercar even said to be equivalent to the Saleen S7 and Pagani Zonda.
Rear side view of Keating Supercars Berus. (Picture from: http://adf.ly/1d1YbV)
Then in 2011, the company also introduced their ZKR series. The car said to be capable of producing up to 650 hp and is able to sprint from 0-100 km/h with a relatively short time, which is 3.6 seconds.

The most controversial is when they release a supercar named Bolt in 2014. The car is claimed to be capable of reaching a top speed of 340 mph or 547 km/h by using LS7 V8 twin turbo engine with a capacity of 7,000 cc, but soon seemed to disappear from the news media.
And in 2017, Keating Supercars will present the Berus supercar in three versions, namely a naturally-aspirated unit giving 650 hp. Adding twin-turbochargers to this will push power up to 2,000 hp (of course), while an electric version promises green motoring with more than 400 hp on tap.

Unfortunately, the company just released the rendering images that reveal a sleek coupe design is decorated with many of the characteristics of modern supercar. At the front, Keating Berus have one set of slim vertical lights and curved bonnet, with a large size air extractor.

The side of the car looks quite simple and only consists of one large air intake, using a middle engine that is unclear specifications. To the rear, seemed pinned active spoiler, and thin rear lights and oval shaped exhaust.
According to the company founder Dr. Anthony Keating, the supercar will be built in Bolton and has a weighs about 1 ton also is expected to give a spectacular performance. It also claimed to have a maximally speed up to 550 km/h and can sprint from 0-100 km/h in just 2 seconds.
But it's still awkward when compared to the engine brought by Bugatti Chiron (W16 quad-turbo with a capacity of 8,000 cc) recorded only generate power up to 1,479 hp. To be sure, we wait for the presence of this supercar next year. *** [EKA | FROM VARIOUS SOURCES | AUTOEXPRESS]
Note: This blog  can be accessed via your smart phone

The Tower, an ambitious project on a new scale and design

Anyone who has ever stood on top of skyscrapers, both the Empire State Building in New York or the Burj Khalifa in Dubai, could prove a force of nature at that altitude. Not only a strong wind, but also other complex natural power to prop up tall buildings meant to be more, far beyond mere aesthetic interest.

With this in mind, Emaar Properties, confirmed that they have completed the wind test for The Tower at Dubai Creek Harbour. The tower is planned to stand 100 meters higher than the Burj Khalifa towering about 828 meters.
The Tower at Dubai Creek Harbour, a skyscraper taller than Burj Khalifa. (Picture from: http://adf.ly/1d1fF0)
The wind test is considered as a very important process in determining aspects of the altitude and the final design.

"The wind test is an important component in the structural design stage, and we have deployed innovative engineering techniques to confirm the strength of this new icon," said project architect based Spanish-Swiss, Santiago Calatrava Valls.

The tests involved 12 analysis and testing a number of different methods to ensure that all cases that may arise can be resolved. They did a test for the entire project using a scale model. As part of the climate tests in the local area, measurements were taken at different heights, including data provided by weather stations. Seismic studies were also performed on local soil conditions.

"This is to ensure maximum security and stability of the building. Design The Tower also includes several systems and systems reliever shock absorbers, which is located at the points and different heights," Emaar said.

Work on the project took place last month, with Aurecon appointed as engineers and architects, as well as the famous Calatrava team in terms of design and engineering work.

This tower was described by the Chairman of Emaar Properties, Mohamed Alabbar as an ambitious project on a new scale and design. "This project requires high precision engineering in all aspects," said Alabbar.
He also said that the Tower will serve as a beacon of hope that is positive for the city and the region. The master plan of the complex area of ​​6 square kilometers was revealed in April last year.

Emaar said, The Tower includes 679 million square meters of residential space, 851,000 square meters of commercial property, 22 hotels with 4,400 rooms and 11.1 million square meters of retail. The tower will feature a VIP park observation deck, and spinning balcony. *** [EKA | FROM VARIOUS SOURCES | DUBAI VIRAL]
Note: This blog  can be accessed via your smart phone

A unique design approach of Omega Motorcycle

Its name is less well known, because it is a relatively new company. Well, a manufacturer of motorcycles from Spain named SBAY Motor Company was founded in 2009 by Sergio Bayarri. However, one of the production is the Omega, a two-wheeled vehicles which pushes the boundaries of conventional motorcycle design with its unorthodox approach. And as quoted of MCS, the company said that the Omega is "a bike that leaves aside what is 'normal' to focus on what matters most, the road".
Omega motorcycle by SBAY Motor Company. (Picture from: http://adf.ly/1d1kUH)
Having seen firsthand its shape, does look very different from the motorcycle in general. Because the motorcycle has a design that could be considered unique. Motorcycles are built using a unique omega type frame structure draped with carbon fiber monocoque bodywork. Special things and uniques of this motorcycle are hub center steering system and swing-arm based front suspension. The complex hub center steering system is built by ISR Sweden, while steering is operated by push-pull cables.
Left side view of Omega motorcycle by SBAY Motor Company. (Picture from: http://adf.ly/1d1kUH)
Here are several pictures of the Omega motorcycle. (All pictures taken from: http://adf.ly/1d1kUH)


Has a weighs about 190 kg, the Omega also sports a single sided swing-arm setup at the rear. The uncustomary swing-arm front suspension has been designed and built in-house by SBAY in CNC machined 7075 aluminium, and is complimented by the side mounted Öhlins dampers allowing 120 mm wheel travel. The rear is held up with a single sided swing-arm setup along with a floating Öhlins monoshock on progressive linkage, which allows up to 110 mm of wheel travel.
Rear side view of Omega motorcycle by SBAY Motor Company. (Picture from: http://adf.ly/1d1kUH)
This custom built motorcycle uses the Harley-Davidson Revolution V-Twin liquid cooled engine with a capacity of 1,247 cc that can spewed the power up to 125 hp. Combined with a 5 speed integrated gearbox, the engine's power send to rear wheel using a chain driven final transmission. Cradling the oily bits is the distinctive chassis – an Omega type frame, CNC machined with 7075 aluminium, and littered with carbon fiber subframes. 
The motorcycle designed and manufactured in house by SBAY Motor Company, the frame is composed of two main parts and joining elements made from a CNC machined single block of high strength aluminium. Components on the Omega are handpicked, and includes the very best in the business, such as Brembo, Rizoma, Motogadget, ISR or Galfer. Tha radical motorcycle sell with the price of €48,000 or approx Rp.690 million.

Kept spur your adrenaline on the power of two-wheeled monster and stay alive with the true safety riding. God will forgive Your sins.... *** [EKA | FROM VARIOUS SOURCES | SBAY MOTOR COMPANY | MCS | WEB!KE]
Note: This blog  can be accessed via your smart phone

Wednesday, August 10, 2016

Is Mercedes Benz making a new hybrid hypercar?

Apparently, the renowned German automotive manufacturer Mercedes Benz is developing a fastest hypercar. In fact, two-door vehicle, named Mercedes Benz R50 is claimed to have the engine power almost equal to Bugatti Chiron.

The difference is, the development of the engine will be embedded in the R50 this time, already carrying the hybrid technology. And the driving system is equipped with two electric motors to drive the front wheels. While the rear-wheel drive still comes from the conventional machines.
(Pictured: Mercedes-Benz AMG Vision Gran Turismo concept) Is Mercedes Benz building Chiron-killing hybrid coupe? (Picture from: http://bit.ly/1ncnH2e)
As quoted from Leftlanenews on Wednesday, July 27, 2016, technically the second electric motor capable of generating power up to 300 hp. For conventional engine power generated rumor says it reached 1,000 hp.

Besides having a large enough engine power, Mercedes R50 also developed to have a total weight fairly light of 2900 kg. Most construction R50 is made of carbon fiber. And the R50's suspension system, the Mercedes Benz will rely on the suspension of GT R variant that launched some time ago.

Rumored Mercedes Benz will launch this new hypercar next year to commemorate the AMG racing division 50th anniversary. The price offered to bring this hypercar reach the US. $3 million or equivalent to Rp.39 billion. For certainty, let us wait for further news from Mercedes Benz. *** [EKA | FROM VARIOUS SOURCES | LEFTLANENEWS]
Note: This blog  can be accessed via your smart phone