These little device gives wheelchairs an electric boost

Many wheelchair which uses the machine to facilitate the users, but unfortunately makes wheelchair becomes larger, heavy and very expensive. Maybe only SmartDrive MX2 will become the solution that can be used (plug and roll) in a regular wheelchair.

The Smart-Drive MX2 provides a versatile alternative – it's an electric drive designed to attach to an ordinary wheelchair and give a boost up hills, over difficult surfaces, or whenever it's needed. (Picture from: http://bit.ly/1Pm86uR)

SmartDrive MX2 is small and lightweight (only about 7 kg) devices and we simply put it in the back of the wheelchair to use. SmartDrive MX2 has a special bracelet with a motion sensor that functions as a remote control for these little drive motor. 

The Smart-Drive MX2 is an electric drive unit designed to attach to an ordinary wheelchair and give a much needed boost whenever it's needed. (Picture from: http://bit.ly/1Pm86uR)

Power is produced from a 250W brushless DC motor combined with a LiFePO4 36 V, 3.4 Ah battery. The MX2 also has an anti-rollback feature, so that if you stop midway up a hill, the unit can get you going again without the threat of slipping backward.

The unit has an anti-rollback feature, so that if you stop midway up a hill, the unit can get you going again without the threat of slipping backward. (Picture from: http://bit.ly/1Pm86uR)

Its use is quite simple, to activate the machine simply by pressing the ON/OFF button then simply move our hands when will run the wheelchair, hand gestures which will rapidly increase the speed and vice versa, slow movement will slow the wheelchair, to stop simply by hitting slowly the wheel.

The unit also has Bluetooth LE Drive Control to allow access from a smartphone. (Picture from: http://bit.ly/1Pm86uR)

These little device that used to make wheelchair claimed ran up to the speed of 9 km/h and capacity of the battery in it can be used as far as 19 km. SmartDrive MX2 can also be paired with a smart phone via a Bluetooth connection from the phone and we can adjust some settings in it.

SmartDrive MX2 scheduled to be sold in the range of US $6,000 (about Rp.84 million), it is not cheap but cheaper than buying a motorized wheelchair. *** [EKA | FROM VARIOUS SOURCES | MAX MOBILITY | SLASHGEAR]

Note: This blog can be accessed via your smart phone.

Scientists say, the spreading of Alien in the Universe like a plague

The search for extraterrestrial life never stops. Later, people getting close to finding the existence of other life in the wilds of the universe. Earth's twin planets are found - which are in the life zone. Also there is a world of creatures survive in outer space. United States Space Agency or NASA also find water on Mars.

Now, the other life in the galaxy has been found, although not in the form as we think. (Picture from: http://bit.ly/1V52erF)

Nowadays, maybe we have not met the aliens that come to Earth with their spacecraft similar dishes. There has been no sign of them wanted to colonize human dwellings or a parasite in our body. They may choose other forms.

The study was initiated by a team from the Harvard-Smithsonian Center for Astrophysics studied the forms of life, and found them to move in a way to spread like a plague. "Life can be spread from star to star, in a pattern similar to the spread of epidemics," said Avi Loeb, one of the study initiators as quoted of LiveScience. In other words, the Milky Way galaxy has been 'infected with pockets of life'.

If life can spread from star to star, researchers should see a characteristic pattern of overlapping growth. In this theoretical artist's conception of the Milky Way galaxy, translucent green "bubbles" mark areas where life has spread beyond its home system to create cosmic oases, a process called panspermia. (Picture from: http://bit.ly/1YtW0WK)

The concept of life spread across the planets and stars called 'panspermia'. Whether it's driving a micro-organism that asteroid, or intelligent beings who will give birth to new horizons. Mathematically, both situations have the basic developmental patterns respectively.

"In our theory, a cluster of life formed, grow, and overlap each other like bubbles of boiling water," said the study lead author, Henry Lin. With such a growth form, life would fill the solar system much faster, than the appearance of originating from spontaneous development.

The telescope technology develops, and scientists are learning more about the substance and conditions. Examining from distant places that might harbor life. Experts are becoming more careful in identifying signs of life on other planets. If life looks in a particular cluster, which has a lot of different planets and stars, it is possible for the organisms proliferate all over the galaxy.

The hardest part to identifying widespread patterns. Humans are only able to see certain stars. Humans can be lucky, live in a location that is not covered by life beyond Earth. If that is true, it became evident that the spread of life, rather than continue to grow and evolve.

Later, astronomers will examine examples of life on one particular side of the Earth. However, if it is true that the Earth is a location that is not an option, statistical analysis point of life that have been found will still be able to reveal the characteristic patterns of organisms.

Transfer of life from star to star, through exploration of species and the natural events in the galaxy, will drastically change the assumption that the galaxy is empty space, to a place filled with life. In other words, there is the possibility of another life to interact with humans. Be a friend or foe, in any form. *** [EKA | FROM VARIOUS SOURCES | LIVESCIENCE]

Note: This blog can be accessed via your smart phone.

A new Taiwanese Electric Sedan

The electric cars usually come from Germany, America or Europe, but apparently now Taiwan can display an electric car at the Frankfurt Motor Show 2015. The car was named Thunder Power EV has a different form of other electric cars in general.

Thunder Power EV Sedan. (Picture from: http://bit.ly/1irGHNi)

This car was made by Thunder Power, a Taiwanese startup company. The car has a maximum power up to 450 horsepower. Why are named Thunder Power? "Because this car is an electric car," says Wellen Sham, CEO of Thunder Power to BBC Top Gear.

Dashboard and interior view of Thunder Power EV Sedan. (Picture from: http://bit.ly/1LqYCiK)

Thunder Power will be a competitor of Tesla Model S sedan. The company is initially produce electrical equipment, but expanded to produce cars. Thunder Power is now headquartered in Hong Kong while the production will be done in Shaoxing, at Zhejiang Province, China.

Rear side view of Thunder Power EV Sedan. (Picture from: http://bit.ly/1LqYCiK)

At the Frankfurt Motor Show 2015, Thunder Power directly introduce their two electric cars in sedan form. One model carrying the battery of 230 kW and another one 320 kW. No half-hearted Taiwanese automobile claims, by using 125 kWh battery is the car can run up to 650 km with just a single charged.

Thunder Power EV Race version. (Picture from: http://bit.ly/1LqYCiK)

Furthermore, it also is said to 320 kWh battery, has a tremendous speed. Imagine though armed with an electric power, this car only takes 5 seconds to be able to run from 0-100 kph, and can reach a top speed of up to 250 kph.

Rear side view of Thunder Power EV Race version. (Picture from: http://bit.ly/1LqYCiK)

It is said to be able to cover the distance of 300 km, the battery needs to be charged within 30 minutes using a fast charge. And took 6 hours to make the battery full with  the standard electrical home connection.

Another plus is also embedded in it, call the car has All Wheel Drive system, modular chassis, and others. Luxury interior is also reflected by having infotainment system and touch screen connection.

This is reasonable, because apparently Taiwan's electric car directly produced by the former Bugatti engineer Dr. Peter Tutzer. And this car has also been tested in Milan Italy. And finally, the company said that the Thunder Power EV Sedan will be launched to the European market in 2017, followed by China in 2018 and then to the American market at a price of around $63,000. *** [EKA | FROM VARIOUS SOURCES | THUNDER POWER | LEFTLANENEWS]

Note: This blog can be accessed via your smart phone.

The First Flying Bike is nearly here in 2017

The flying motorcycle like in science fiction movies eventually will become apparent in the near future. Aero-X which will be the first flying motorcycle and will be released in 2017. As reported by the Morebikes, A California-based company, Aerofex who became the creator of this flying motorcycle claimed, the Aero-X can carry up to two people.

The Aero-X hoverbike is a hovercraft that rides like a motorcycle - an off road vehicle that gets you off the ground. (Picture from: http://bit.ly/1VkPtZX)

"Aero-X will have a positive impact on the agricultural sector, herd management, and geo-survey, particularly in parts of the country that lack air transport," said Mark De Roche, the company's CTO and the Aero-X inventor.

Aero-X hoverbike going on sale in 2017. (Picture from: http://bit.ly/1VkPtZX)

With a maximum haul weights up to 140 kg (310 lbs), the Aero-X can fly up to a height of 3 meters (10 ft) above the ground and a cruising speed reaches 70 km/h (42 mph). Aero-X is made by the super lightweight materials, namely carbon fiber for the body and also the propellers. As a result of this flying motorcycle has a dry weight of just 356 kg (785 lbs). This allowed it to take off vertically and also expected to run for about 75 minutes on a full tank of fuel.

Its use was also claimed easily. Aerofex mentioned the Aero-X operating systems is made the same as the conventional motorcycle with the control center at the handlebar.

"Its operation is simple, low cost, and the unique ability makes it suitable for transportation of disaster relief, search and rescue missions. The Aero-X well suited to the needs of the border guard facilities in the playground." added Mark.

The Aero-X hoverbike is around 4.5 m (14.8 ft) in length and 2.1 m (6.8 ft) in width. For the price, it will be marketed at a price of US. $85 thousand or equivalent to Rp.1.2 billion. Some of the additional features being considered for the Aero-X include whole vehicle airbags, flotation pontoons for water operations and trailers. *** [EKA | FROM VARIOUS SOURCES | AEROFEX | MOREBIKES]

Note: This blog can be accessed via your smart phone.

The largest 3-D printing machine in the world

3-dimensional printing technology is expected to be one of the future technology trends. 3D printer is printing equipment in the form of so-called three-dimensional or stereolithography-- a three-dimensional object made by placing a layer of material in a row.

BigDelta, the world’s largest Delta 3D printer stands at 12 meters (40 feet) tall. (Picture from: http://bit.ly/1KFrF1p)

Since the technology crowded used today, the world community began to experiment with making things. Now the 3-D printing machine can also make our childhood dream come true. For example, to building a house or other large buildings using the machine.

An Italian engineering company named the World's Advanced Saving Project (WASP), recently announced their 3-D printing machines are the largest in the world. This design was made for printing houses or other buildings using the organic ingredients. As quoted from Geeky Gadgets, that the machine can be as high as 12 meters using clay as a mold.

Through their official website, the company claims as the maker of three-dimensional printing machines in various sizes-- and recently announced it will focus on spreading the good of mankind.

Aerial view of WASP's Big Delta 3D printer. (Picture from: http://bit.ly/1KFrF1p)

In the past year, the company showed off a 3-dimensional printing machines as high as 4.5 meters that can print using mud, clay, or natural fibers. Now, they have created Big Delta-- the 3-dimensional printing machine as high as 12 meters!

The print engine is backed by a solid metal frame that forms a circle with a diameter of 6 meters. Then the nozzle which will rotate and also functions as a mold release the mixture of raw materials. According to the report, it only needs 10 watts to powered this spray.

A new rotating nozzle will double as a mixer and allow the Big Delta even more flexibility with the choice of materials. (Picture from: http://bit.ly/1KFrF1p)

This print engine can use silt and clay materials which will be accompanied by a mixture of chemicals or cement as reinforcement. The company also is conducting tests on the manufacture of 3-dimensional printed material that can prevent insects creeping on the wall.

The easy usage and removable of machine and the materials in general can be found in everywhere-- make this technology can be utilized in the affected areas or developing countries.

According to the WASP reports, Iglesias city on the southern coast of the island of Sardinia, has expressed interest to test the Big Delta, and it most likely will be the first residential development which will utilize this giant print engine technology.

And according to Geeky Gadgets, WASP expected to participate to show off the Big Delta in Massa Lombarda in Italy on September 18 to 20, 2015. *** [EKA | FROM VARIOUS SOURCES | WASP | GIZMAG | GEEKY GADGETS]

Note: This blog can be accessed via your smart phone.

Bentley prepare a hypercar for its centenary celebration

Bentley Motors Limited started operating since 18 January 1919. This British company is preparing to celebrate the anniversary of 100 years in 2019. British automaker will present one particular model, namely hypercar that carries high technology and made with a limited amount.

Is the 1999 Bentley Hundaudieres becoming the Bentley's special lined up for its centenary? (Picture from: http://bit.ly/1YiQia4)

The statement expressed directly by Bentley CEO Wolfgang Durheimer when talking with TopGear. "A hundred years would be a good moment to make a model of the latest series with a limited number. The EXP 10 Speed ​​6 Concept car of the future could be real," said Durheimer. Then he added, their project of a century editions hypercar will soon be followed up in the near future in Crewe, England.

The specifications as to what has not been leaked, Durheimer also still confused his hypercar will use carbon fiber or other lightweight components. But, if the model has entered the production line, the price is certainly more than £1 million. In car manufacture, ability Bentley could not be underestimated.

Or this Bentley EXP 10 Speed 6 concept car. (Picture from: http://bit.ly/1XNWHda)

As we have stated in the article about the Bentley EXP 10 Speed 6 concept car some time ago, that the car is planned to be produced after Bentley Bentayga entered the production line (as we quoted of Auto Express on Monday, July 6, 2015). Ofcourse, this indicates that Bentley will seriously to produce this concept car in the near future.

Therefore, Bentley was known for their cars with consecutive victories at the 24-hour Le Mans race from 1927 to 1930. In 1931, Bentley was bought by Rolls-Royce and the last, the British luxury car brand was acquired by Volkswagen Group at a price of £430 million in 1998. *** [EKA | FROM VARIOUS SOURCES | AUTOEXPRESS | TOPGEAR]

Note: This blog can be accessed via your smart phone.