When talking about turbine engines and cars, maybe not many people know about it. Indeed, this type of engine is more often found in aircraft or helicopters and is not commonly used in four-wheeled vehicles or two wheels. Previously we have also presented articles about the figure of a turbine engined motorcycle called MTT Y2K.
1963 Chrysler Turbine Car at the Walter P. Chrysler Museum in Auburn Hills, Michigan. (Picture from: https://bit.ly/395czBB)
Turbine engines have advantages over conventional piston engines, such as larger bursts of power, less maintenance, and last longer, as well as a simple size. But this machine has a big weakness that makes it unsuitable to be used as a drivetrain for cars or motorcycles, besides producing very noisy sounds as well as very expensive production prices.
Right side view of the 1963 Chrysler Turbine Car. (Picture from: https://bit.ly/2Wsrsey)
It turned out that the installation of turbine engines on the cars was carried out in 1963 to 1964 as part of research conducted by Chrysler, one of America's leading automotive manufacturers. Yes, at that time there's a beautiful car full with a classic American aura given the name of Chrysler Turbine Car due to under the hood had a turbine engine attached.
The steering wheel and dashboard view of the 1963 Chrysler Turbine Car. (Picture from: https://bit.ly/2WtDOTV)
But it is not a matter of the design of the car that is the subject of discussion this time, but its engine! The turbine engine used in this car is not like a jet (turbofan) engine which if applied to a car, can make other road vehicles catch on fire while directly behind it.
Chrysler Turbine Car is a 2-door hardtop coupe created by Elwood Engel and Chrysler's studios. The car also features a variety of modern features such as power brakes, power steering, and TorqueFlite transmission, and was coated with a metallic, root beer-colored paint known as "turbine bronze".
The turbine engine view of 1963 Chrysler Turbine Car. (Picture from: https://bit.ly/2Wsrsey)
Then the body of the Chrysler Turbine Car was done by Ghia, an Italian design studio and Chrysler completed its assembly in Detroit. The car is driven by an A-831 turbine engine that has a working principle like a helicopter (turboshaft) engine and said able to run on a variety of fuels. The engine can output up to 130 horsepower with a torque of 576 Nm.
Rear side view of 1963 Chrysler Turbine Car at the Walter P. Chrysler Museum in Auburn Hills, Michigan. (Picture from: https://bit.ly/3bd76tW)
At that time, the car was produced as many as 55 units, with details of five prototypes and a limited run of 50 cars for a public user program. Finally in 1966 when the program was declared over, Chrysler took all of these cars and destroyed all but nine of them. Then Chrysler kept two units, five units were displayed in the museum and the remaining two units were in a private collection.
Just for information, the Chrysler turbine engine program completely stopped in 1979, which was mostly due to engine failure to meet government emissions regulations, relatively poor fuel economy, and as a prerequisite for receiving government loans in 1979. *** [EKA | FROM VARIOUS SOURCES | WIKIPEDIA]
Note: This blog can be accessed via your smart phone
The latest Batman's movie titled 'The Batman' is planned to be released on June 25, 2021, where the handsome actor Robert Pattinson will play as Bruce Wayne, known as Batman when he becomes a superhero who defends the Gotham City from organized crime.
This is what the latest Batmobile looks like in 'The Batman' movie. (Picture from: http://bit.ly/2TN27KU)
But what raises the curiosity of The Batman movie is, whether the Gotham City superhero will continue to use his flagship car named the Batmobile. Yes, of course the Batmobile will always be used, but only its form will be different.
This is what the latest Batmobile looks like in 'The Batman' movie. (Picture from: http://bit.ly/2TN27KU)
As quoted from Screenrant, the Batmobile used by Robert Pattinson seems to be an American muscle car known as 1970 Plymouth Barracuda which had a modification process.
And also reportedly, the car modification process was included in the drivetrain which is a mid-mounted twin-turbo engine seemingly a V-8, though some on social media are seeing a fifth coil pack on each side that would make it a V-10.
This is what the latest Batmobile looks like in 'The Batman' movie. (Picture from: http://bit.ly/2TN27KU)
From the photo, the turbos locates in between the roll cage and bodywork in the back and you'll find two snails with short exhaust pipes expelling waste gases directly into the atmosphere.
Of course this will be a question, why the Batmobile uses an American muscle car? Apparently, The Batman movie will be set in the 1990s, where the director wanted to show in the movie when Bruce Wayne was young and the beginning as Batman.
Not only modifying a classic car into the Batmobile, and in the movie, Bruce Wayne is also seen sewing his own costume. Therefore, do not expect too much that the Batman will be very cool looking like the Batman who had appeared in the Batman V Superman: Dawn of Justice or Justice League. *** [EKA | FROM VARIOUS SOURCES | SCREENRANT | THE DRIVE]
Note: This blog can be accessed via your smart phone
Development of V8 engined cars carried out by Automobili Ferruccio Lamborghini S.p.A. does not stop with the Urraco model. It has not been able to produce the best model yet, although the development process has cost a lot of money including funds from Ferruccio himself and the company.
It was more crucial and critical that the company's finances at that time were not in good condition where the sales figures could not compensate for its large investments, even after the Urraco P300 model was introduced. Even worse, the factory was not in a position to consider replacing Urraco at that time.
1976 Lamborghini Silhouette designed by Marcello Gandini of Carrozzeria Bertone. (Picture from: http://bit.ly/33w9nxC)
Ferruccio still believes that the more mainstream models could succeed and make more money than the exotic V12 supercars, so he asked Bertone to redesign the Urraco P300 into a different looking car, so as to be able to drive sales to a level that would boost sales to a level that would finally create some decent return on the massive investment in the development of the V8 engined cars.
Then Bertone prepared the first prototype which was projected as the Urraco's successor. The prototype was displaying the extension of the round wheel arches and modified rear window, further development of this initial concept leads to the figure that came to be known as the very special Lamborghini Silhouette which was first shown to the public at the 1976 Geneva Auto Show.
1976 Lamborghini Silhouette was a targa-style version of the Urraco P300. (Picture from: http://bit.ly/33w9nxC)
The refurbished model still clearly showed its Urraco origins but took the original design several years into the future. The Silhouette would become the first production Lamborghini featuring a removable roof section creating a convertible model.
Only one downturn on this configuration is the removal of the rear seats and for the Lamborghini Silhouette, the configuration changes into two seats by making enough space to store its removable roof section in the rear, where those two removed seats located before.
Then in the interior of the Silhouette, there was a significant improvement over the previous Urraco model, such as the use of a magnificent new bucket seat, far more stylish with an aggressive exterior. But the use of standard fabrics is still used with a beautiful vertical line in the middle of the chair and backrest.
The steering wheel and dashboard view of 1976 Lamborghini Silhouette. (Picture from: http://bit.ly/2vwtvTS)
Although the interior was changed to a more ergonomic style with a new dashboard that tilted slightly towards the driver, the use of genuine leather for the interior is still optional for the Silhouette. Imagine being caught in some heavy rain with a cloth interior. It could be a problem if you didn’t bring those beach towels with you.
Shifting on the exterior, the impressive deep front spoiler with similar styled, squared-off wheel arch extensions as needed to cover the innovative telephone dial wheels shod with state of the art Pirelli P7 tires, 285 mm wide at the rear. Then the wheel size increased from the original 14 inches to a larger 15 inches, while the overall width of the rim rose to 11 inches at the rear.
1976 Lamborghini Silhouette used a V8 engine derived from the Urraco P300 is driven up to 265 hp. (Picture from: http://bit.ly/33w9nxC)
Then the entire suspension geometry was modified to keep those 285 mm of Italian rubber as flat as possible on the road and maintain full traction on the wide rear wheel at all times. The Miura inspired engine cover design from the Urraco was lost during the redesign, and a new tunnel back was introduced incorporating a rollover cage to comply with safety regulations for open-top cars.
While the engine is derived from the Urraco P300 but is driven up to 265 hp which means adding weight from the substantial modifications needed to the chassis to go roof-less, it does not mean that the Silhouette would stay behind the Urraco P300 when driving on the open road.
1976 Lamborghini Silhouettewas kept in production for only two years, with a total at no more than
52 units from which only 27 to 31 are believed to have survived today. (Picture from: http://bit.ly/33w9nxC)
Overall, this should be a good idea of open-top driving a true Lamborghini very appealing to potential buyers, but the Silhouette couldn’t fulfill its high hopes. So it does not make the company's financial condition better, due to Lamborghini couldn’t convince customers to buy the Silhouette. And even worse is the fact that the company was unable to certify the Silhouette for sale in the United States, possibly the biggest market for this kind of Lamborghini.
The Lamborghini Silhouette was kept in production for only two years, with a total at no more than 52 units from which only 27 to 31 are believed to have survived today. And it is not surprising that this model is now included in one of the rare Lamborghini models so to get it requires more effort at a high cost too, just like the whole experience of the V8 engined car development that was carried out by the late Ferruccio back in the Seventies.
However, the development efforts of the V8 engined car by the Italian premium car manufacturer have not stopped at the Lamborghini Urraco and Silhouette even though production stopped in 1979. Then the last reincarnation of the V8 engined model was continued on the Lamborghini Jalpa which was first introduced at the Geneva Motor Show 1981. And the final model of V8-engined car would show some decent production numbers outselling all its predecessors several times over. *** [EKA | FROM VARIOUS SOURCES | LAMBO CARS | SUPERCARS.NET]
Note: This blog can be accessed via your smart phone
Design modifications often attract the attention of automotive enthusiasts. Because not only presents a design that is more okay and new, design modifications often provide inspiration for modification enthusiasts. But have you ever imagined if the Porsche 911 was modified to be an offroad car?
If you never imagine it, try to see this Porsche modification which is guaranteed to change the total look of the car to be cooler. Because with a touch of almost the entire body to make a German-born car this one is very different as a result of Gemballa's creations.
This fierce-look Gemballa Avalanche 4x4 dirt-monster concept made based on the Porsche 911. (Picture from: http://bit.ly/2QiRFZs)
Gemballa, one of the leading automotive tuners managed to modify the Porsche 911 by changing its appearance to a 4x4 off-road car. The results of the car modification became known as the Gemballa Avalanche 4x4 Concept.
However, the automotive tuner did not provide information about the change package embedded in the Porsche 911. However, the exterior design of the modified Porsche 911 looks like a rally car.
Call it on the bonnet which is replaced with a new bonnet with ventilation that can remove the heat from the engine properly. In addition, the part of the roof was changed in order to be able to cut the wind well.
The Gemballa Avalanche 4x4 Concept' body presenting a stronger impression in each corner by adding wide wings to the rear to add the tough impression. (Picture from: http://bit.ly/2QiRFZs)
Then, the composition is done on the body by presenting a stronger impression in each corner and adding wide wings to the rear to add the impression of being tough and able to cut the wind perfectly, so as to increase performance.
Sebuah kiriman dibagikan oleh GEMBALLA (@gemballainstagram) pada
Then the tuner also overhauled the legs of the car by replacing a new suspension and using tough tires that can be used in any terrain area, especially muddy lanes. This means that the car is deliberately designed to be able to devour all-terrain, even more so Gemballa Avalanche will carry the 4x4 wheel drive.
But unfortunately, the special Porsche automotive tuner did not provide complete information about the release date or production of the modified Porsche 911. *** [EKA | FROM VARIOUS SOURCES | GEMBALLA | AUTOBLOG | HYPERBEAST]
Note: This blog can be accessed via your smart phone
Bugatti Automobiles S.A.S presents its latest supercar variant with a more sporty appearance, named Bugatti Chiron Pur Sport. Then this special edition supercar will begin to be assembled in the second half of 2020 and made in a limited number, which is only 16 units which will be priced at €3.2 million or around Rp.50.5 billion per unit.
The all-new Bugatti Chiron Pur Sport is the latest supercar of the Molsheim-based auto manufacturer with a more sporty appearance. (Picture from: http://bit.ly/3aQ3dLl)
The all-new Bugatti Chiron Pur Sport is claimed to be different from the various variants of the Bugatti standard model and is suitable for speeding on the circuit. As quoted by Carscoops, the Chiron Pur Sport has new aerodynamics and the suspension that able to reduces weight and makes power easier to obtain. The engineers improve control and make Chiron Pur Sport more fun to drive while cornering.
The all-new Bugatti Chiron Pur Sport is used an 8.0-liter quad-turbo W16 engine capable of producing power up to 1,500 PS (1,103 kW/1,479 hp). (Picture from: http://bit.ly/3aRIMO4)
This supercar model will use the same engine of the Chiron standard model, which is an 8.0-liter quad-turbo W16 engine capable of producing power up to 1,500 PS (1,103 kW/1,479 hp). However, the redline has moved 200 rpm higher than the Chiron standard which reaches 6,900 rpm. The latest monumental engine is mated to a recalibrated automatic transmission system.
The all-new Bugatti Chiron Pur Sport is made in a limited number, which is only 16 units which will be priced at €3.2 million. (Picture from: http://bit.ly/3cUhetc)
Changes were also made to the gearbox which includes a low range transmission ratio of around 15 percent compared to the standard model which has a positive effect on power delivery and engine response. The result is an elasticity value of 40 percent better than the Chiron standard model.
The all-new Bugatti Chiron Pur Sport is adopting an aerodynamically optimized front fascia with larger holes, larger horseshoe grille, and a new splitter of carbon fiber. (Picture from: http://bit.ly/3aRIMO4)
Then the chassis also experienced a significant increase, included front springs is made 65 percent more rigid, stiffer rear springs, and adaptive damping that focused on the performance.
The Chiron Pur Sport uses 16 kg lighter Aero wheels designed to improve aerodynamics and brake ventilation. Then the rims were wrapped with Bugatti Sport Cup 2 R tires measuring 285/30 R20 at the front and 355/25 R21 at the back which was developed specifically by Michelin.
The all-new Bugatti Chiron Pur Sport is uses 16 kg lighter Aero wheels designed to improve aerodynamics and brake ventilation. (Picture from: http://bit.ly/3aRIMO4)
For its braking system, Bugatti chooses to use a new titanium brake pad base panel with lighter discs, which together made a lighter alloy, thus making the Chiron Pur Sport able to trim its weight to 19 kg lighter than the standard model.
Bugatti also made changes to the car exterior as well and looks the Pur Sport adopting an aerodynamically optimized front fascia with larger holes, larger horseshoe grille, and a new splitter of carbon fiber.
While at the rear also experienced very significant changes, including the installation of 1.9 meter wide spoilers which are said to be able to produce greater downforce. Then the new exhaust pipes are also made of 3D printed titanium and Bugatti said that its weight is very light and also resistant to extreme temperatures. *** [EKA | FROM VARIOUS SOURCES | BUGATTI | CARSCOOPS | AUTOCAR]
Note: This blog can be accessed via your smart phone
Indeed, this supercar concept has been displayed by its maker Karma Automobile at the 2019 Los Angeles Car Show event which was held on November 22 to December 1, 2019. The automaker mentioned the Karma SC2 Concept offers an amazing form of a future supercar.
Karma SC2 concept is claimed able to make bold electric performance of 1,100 horsepower. (Picture from: http://bit.ly/3cWD3sn)
Although it is not yet known whether the Karma SC2 will become a legal road car model that will also be marketed on a massive scale, it cannot be denied that this supercar has indeed succeeded in attracting the attention of the world's car lovers who attended its debut in Los Angeles at the time.
Basically, this concept car is the successor of the Karma SC1 Vision Concept which has been present before and is an open coupe car. The difference, in this Karma SC2, Karma Automobile installed a proper roof. A number of features embedded in this new car are a powertrain that is capable of producing an average power of 1,100 horsepower so as to record an acceleration time from 0 to 100 km per hour in less than 2 secs.
Karma SC2 concept does have a unique scissor-doors because it is opened and closed by sliding the door up and down. (Picture from: http://bit.ly/2IUOGCp)
The automaker claims that they are developing a battery that able to bring the car to a distance of 350 miles on a single charge with normal use. Besides that, the car's torque is also controlled by a computer to manipulate the power supplied to its wheels.
Behind the sleek and sexy appearance of the body with metallic silver paint that binds the whole body of the concept car on display for the first time at the Los Angeles Car Show, it turns out there are a number of other features of this car that are in the spotlight of visitors, one of which is the door. Karma SC2 does have a unique scissor-doors because it is opened and closed by sliding the door up and down.
To support the Karma SC2 concept performance, there's an I-shaped 120kWh battery is housed in the center tunnel beneath the dashboard and seats. (Picture from: http://bit.ly/3cWD3sn)
This concept car also has electronic features that are known to be widely used in premium cars today, such as cameras, proximity sensors, long-range radar sensors, heads up displays. The car also uses a showcase design feature known as playback mode, which allows computers, controls, and displays to present a real driving experience even if the car is at rest.
In this car is mounted the winglet style sensor plus cameras next to its doors, a place where usually a conventional car rearview mirrors are installed. Another unique thing about this car is that the headlight does not stand out, so it seems to blend into the front of the body so that it presents a smoother body contour.
Karma SC2 concept has seen three interior colors, namely beige, silver and black. (Picture from: http://bit.ly/3cWD3sn)
Not only that, the car has a semi-square shaped steering wheel. In addition, this car also has a square headrest with sharp angles. So far the concept car on display has seen three interior colors, namely beige, silver and black. Unique styling is also seen around the seat parameters, such as stitches that match the stitching pattern on the smaller steering wheel.
The unique styling of Karma SC2 concept is also seen around the seat parameters, such as stitches that match the stitching pattern on the smaller steering wheel. (Picture from: http://bit.ly/2Wapkbe)
At a glance, Karma SC2 looks like it has a "nose" section that is quite long with a short deck that is identical to the performance car. This car does have fairly low ground clearance. The result, the car has a futuristic look but still maintains an aggressive impression.
This car has a black semi-gloss roof that has an overhang at the top of the side and rear windows. Installation of this overhang is considered to provide an artistic touch but with a "squished" look. Inside the roof, there is also a headline which is said to have an inlay with optical fiber to enlarge the seat. The seat also has a biometric inlay for the customization of the passengers and drivers of this car.
Karma SC2 concept is uses of charcoal-colored alloy wheels with conventional low profile tires are well suited to brake rotors and calipers. (Picture from: http://bit.ly/3cWD3sn)
As you can see the Karma SC2 does not have a grille on the front. Instead, Karma Automotive then installed a stylish scoop to the side. This scoop is claimed to help the process of brake cooling, and also makes the car look seem more aggressive and sporty.
The lower part of the rear of the car also has a scoop and channel that matches the scoop on the front, so for a moment, it reminds us of a typical Japanese drift car.Then the bonnet area has a simple moniker on the front center and also a scoop on the side where the fender meets the hood.
Karma SC2 indeed reaps a lot of praise thanks to the appearance of its final form is very riveting. The use of charcoal-colored alloy wheels with conventional low profile tires are well suited to brake rotors and calipers that display the end result that is always expected from a car that carries a futuristic theme like this.
Also reported, Karma SC2 has a technology called biometric entry lock from the outside, including fingerprint and facial recognition.Some of these features are also planned to be included in future Karma Automobile production models, for example, the Revero GT 2020.*** [EKA | FROM VARIOUS SOURCES | KARMA AUTOMOTIVE | AUTOBLOG | NETCARSHOW]
Note: This blog can be accessed via your smart phone
When seeing the form of the latest supercar made by British premium car manufacturer Aston Martin, it seems they are inspired by the figure of Elva Speedster created and launched by its compatriot fellow premium car manufacturer McLaren last year.
The new V12 Speedster is an "uncompromising, visceral two-seater" from Aston Martin. (Picture from: http://bit.ly/2Q52qhT)
By taking place at its headquarters in Gaydon, England, the company officially presents a new automotive work for the world's speed enthusiasts in the form of a roofless supercar named Aston Martin V12 Speedster. And it should be noted this supercar is made in a limited number that is only 88 units worldwide and is intended for the rich speed-lovers.
Indeed, no one doubts the work of 'Q by Aston Martin' because this car really demands adrenaline from the driver. This is reasonable because Aston Martin was born from a history of racing and aeronautical design. The design process of the Aston Martin V12 Speedster began about 12 months ago with intensive development and careful planning carried out by "Q by Aston Martin" and Aston Martin Design.
The roofless, no windscreen V12 Speedster was created by the Q by Aston Martin bespoke division and was made limited to 88 examples. (Picture from: http://bit.ly/2Q52qhT)
"It is a matter of pride to unveil the newest Aston Martin model which is the most interesting now. The Speedster V12 is an extraordinary display of the vast capabilities and determination of the 'Q by Aston Martin' team, who tirelessly created this stunning two-seat sports car aimed at our hopeful and enthusiastic customers, "said Dr. Andy Palmer, President, and CEO of Aston Martin Lagonda Group.
Aston Martin V12 Speedster uses a 5,200 cc engine, twin-turbo that can burst peak power up to 700 horsepower with a torque of 753 Nm. (Picture from: http://bit.ly/2Q52qhT)
Aston Martin V12 Speedster uses a 5,200 cc engine, twin-turbo that can burst peak power up to 700 horsepower with a torque of 753 Nm. Then those power amount is channeled to drive the wheels through its ZF 8-speed automatic transmission system. And its acceleration from 0 to 100 kph in just 3.5 seconds, the highest speed is limited to 300 kph.
Aston Martin V12 Speedster uses elements from DBS Superleggera and Vantage which actually have a unique platform. (Picture from: http://bit.ly/2Q52qhT)
Aston Martin V12 Speedster uses elements from DBS Superleggera and Vantage which actually have a unique platform. Shock absorbers use independent double-wishbone on the front and multi-link for the rear.
As for the 21-inch rim supported by Ceramic Carbon discs with a diameter of 410 mm in front and 360 mm for the back. For those who want to have it, the price is estimated to reach £765,000 or equivalent to Rp.13.9 billion per unit and will begin shipping in the first quarter of 2021. Are you willing to have this V12 Speedster? *** [EKA | FROM VARIOUS SOURCES | ASTON MARTIN | AUTOCAR]
Note: This blog can be accessed via your smart phone
As stated in the previous article, regarding the rise of the French premium car manufacturers in the post-war period. At that time the manufacturer in difficult times and tried to regain a place of honor in the world automotive industry through its famous model, Bugatti Type 101.
The 1965 Bugatti Type 101C Ghia was was designed by Virgil Exner and built by the Italian coachbuilder Ghia. (Picture from: http://bit.ly/2TR4c79)
These models were built using the basis of the legendary Bugatti Type 57 Pre-War model. In total there were 7 chassis of Type 57 Pre-War built and bodied by three different coachbuilders, such as Gangloff, Guilloré, and Antem before the company sank into bankruptcy.
Sketch of the Bugatti Type 101C Ghia is made by Virgil Exner. (Picture from: http://bit.ly/2vGRcct)
The last Type 101 was designed by Virgil Exner then built by the Italian coachbuilder Ghia atop the legendary Type 57 Pre-War chassis with the chassis number of 101-506 and later known as Bugatti Type 101C Ghia. It was exhibited at the 1965 Turin Motor Show in an attempt to revive the brand, but financing could not be arranged and production plans were scrapped. In the end, the car sold to Exner, and he owned the car for many years.
This Bugatti Type 101C Ghia was exhibited for the first time at the 1965 Turin Motor Show in an attempt to revive the brand. (Picture from: http://bit.ly/2vGRcct)
It all began in December 1963, when Virgil Exner in Esquire published a series of seven design proposals to revive classic cars (mostly Americans) drawn according to modern tastes. Where four models in-between successfully transformed into a full-size car by Virgil Exner himself, namely Stutz Blackhawk, Duesenberg Model D, Mercer-Cobra and this Bugatti Type 101C Ghia.
The 1965 Bugatti Type 101C Ghia also featured the sporty high-class dashboard. (Picture from: http://bit.ly/2vGRcct)
For the Bugatti case, he then sent the chassis he bought in 1961 to Ghia, to realize the car figure in accordance with his previous design. Then at the Ghia atelier, the Type 101 chassis were shortened by a full 460mm and the steel bodywork with Virgil’s design was placed on it with only minor changes, namely the side-mounted exhaust pipes and raked windshield (which gave place to a tasteful split windscreen).
The 1965 Bugatti Type 101C Ghia used a slightly updated version of the 3,257 cc straight-8 supercharged engine, producing around 200 hp. (Picture from: http://bit.ly/2vGRcct)
After 6 months of work, the work was completed presented at the 1965 Turin Motor Show, at that time there were 50 buyers signed up for the car, and said Elvis Presley the most notorious among them.
The rear-design of 1965 Bugatti Type 101C Ghia is also very "sexy," with the slim and high rear end. (Picture from: http://bit.ly/2vGRcct)
Unfortunately, Exner fell into financial problems before the production could start and the project was aborted, the car is taken as a part of the payment for debts. Exner was obliged to sell the car to Thomas Barett III, who after that sold it to Irving Tushinsky and subsequently to Mr. Anderson.
The Blackhawk Behring Museum bought it in about 1984 and sold it in December 1988 to General William Lyon, its current owner who also owns the famous Type 10 Petit Pur-Sang, the first real Bugatti which Ettore built in the basement of his house while working as a manager for Deutz, two years before the foundation of his factory. *** [EKA | FROM VARIOUS SOURCES | AUTO.HOWSTUFFWORKS | DRIVETRIBE | WIKIPEDIA | CARSTYLING.RU | ALLCARINDEX | SPECIALCARSTORE]
Note: This blog can be accessed via your smart phone
