-->
Drop Down MenusCSS Drop Down MenuPure CSS Dropdown Menu

Wednesday, December 21, 2016

The unusual custom touches on Honda Supra Fit moped

There are looks many differences which pinned on the 2007 Honda Supra Fit compared with the moped modification concept in general. The custom motorcycle which is a modification result of Saibun Panjaitan of Pekanbaru-based workshop named Afto Motor is totally out of the box. By carrying the classic board tracker concept, Afto Motor managed to display an unusual custom works.

When you first look at it, no one thought that the motorcycle was the Honda Supra Fit. Moreover, if you look at its cylinder block which had been modified from its original horizonal position changed to vertical, aka upright.
The unusual Honda Supra Fit board tracker custom by Afto Motor. (Picture from: http://adf.ly/1grkRw)
It wasn't easy to change the position of the cylinder block, because certainly could make all the components also changed. And of the modification data, the changing position process of cylinder block took a quite long time.

Due to the mounting-base of cylinder block should be made anew, while the original standard holes must be patched with re casted it. Not finished until there, to make the machine could be stand upright, the modifier shall make a new holes in the top of crankcase for the tracks of piston work, including four bolt holes of the block buffer and the oil lines.
Left side view of the unusual Honda Supra Fit board tracker custom by Afto Motor. (Picture from: http://adf.ly/1grmMr)
Uniquely, for components such as crankshaft, piston completely not changed, alias still in its standard condition. To make the engine looks neat, some sectors deliberately polished and coated with chrome.
At the front placed a springer is combined with a unique handlebar, and completed witha small-sized custom fuel tank was hanging in the middle of the chassis. (Picture from: http://adf.ly/1grltn)
Once completed on the machine, now turn to spruce the frames sector. Just like any other builder, the bike's frame was made manually of 3/4 inch seamless pipes.
Engine was changed to upright position by creating a new hole for the piston. (Picture from: http://adf.ly/1grkRw)
Do not expect there's shock absorber on the back, because the board tracker style typically use rigid chassis. While at the front placed a springer is combined with a unique handlebar, and completed with the custom fuel tank was hanging in the middle of the chassis. Wow... That's a quite cool custom motorcycle isn't?

Kept spur your adrenaline on the power of two-wheeled monster and stay alive with the true safety riding. May God will forgive Your sins and so does the cops.... ••• [EKA | FROM VARIOUS SOURCES | OTOMANIA.COM]
Note: This blog  can be accessed via your smart phone
Kindly Bookmark and Share it: